Specifications are as follows:
This Electric Vehicle has been designed to carry 6 off ‘J’ type cylinders, 5 off ‘E’ type cylinders, 5 off ‘F’ type cylinders and 6 off ‘AD’ Type cylinder.
The ‘J' type cylinder would be standing up against the centre pillar of the vehicle, the ‘F’ type cylinders would be stored in a rack standing up across the vehicle, ‘E’ cylinders stored lying down in rack on rear of vehicle and ‘AD’ in rack against front head board of vehicle.
The Vehicle can also be made to carry any combination of cylinders you require.
|
· Gross weight |
1 ton |
|
· Wheels and tyres |
Detachable 4 stud 16 x 4 pneumatic standard. |
|
· Steering |
Single wheel. |
|
· New type Zapi head |
Fitted with safety features, forward and reverse butterfly switch so that it can be worked from either side. Extra safety feature, if truck comes into contact with operator whilst truck is moving forward it will automatically go the opposite direction. |
|
· Lights |
To indicate that charger is on. To indicate that ignition is switched on. |
|
· Horn button |
Fitted on head. |
|
· Controller |
Fully electronic MOSFET. |
|
· Ignition switch |
Fitted on to the handle. Supplied with two keys |
|
· Batteries |
4 x 6 volt, 170amp/hr at 5 hour rate, 2.4kw standard. |
|
· Charger |
Built in as standard fitted with 13amp, 240 volt 1ph supply. Can charge from any 13 amp wall socket. |
|
· Material |
Vehicle Frame to be made from rolled hollow section with angles all securely braced and welded together. The cylinder frame constructed from rolled hollow sections and mild steel sheet. |
|
· Finish |
Painted to any colour of your choice. |
Optional Extras:
· Tyrefill (set of 3)
· Tyrefill (set of 4)
· 4 Wheel version Pedestrian Truck
· Electric Crane with push button control fitted